Brass
Terminals :
Plain
washers to BS 4320: 1968 DIN 125, 433 and 9021.in Brass S.S.
Copper Bronze Pressings pressed parts components presswork
Also available special pressed parts pressings and deep drawn
components for
Switchgears, Transformers, Elevators, Heaters and other
electromechanical applications.
Pressing and pressed parts up to 5mm thickness can be provided
on 400 tones
press. Auto pressed parts and Pressings for automotive use in
stainless steel Brass
shims pressed nuts Brass terminals auto parts available.
Brass Battery Terminals Copper Battery terminals Battery
Connectors are available in many different designs but in
general there are only main three types which are - LUCAS ,
ANGLE & STRIP.
In which Lucas is available in three sizes, 9.5mm,11mm & 13mm.
Top three figures are of Lucas type.
We have also developed some special designs made by "FORGING"
on the demand of our customer.
We are capable of designing any type of Terminals through
Forging or any other process, though it is too difficult.
|
Hole Copper Lugs
Terminals for Transformers
Material Soft High Conductivity Copper
Size 300mm2 to 1000mm2
Finish Electro tinned / Nickel Plated
Features Available as per Stud hole specifications
Aluminum Long Barrel Connectors Ferrules
Material Soft High Conductivity Copper
Size 300mm2 to 1000mm2
Finish Surface Aestivated
Aluminum Long Barrel Lugs
Material High Conductivity Aluminum Tube
Size 35mm2 to 1200mm2
Finish Surface Passivated
Features Connectors are profiled with oxide inhibiting
compound & capped at both ends
Copper Butt Connectors
Material Soft High Conductivity Copper
Size 300mm2 to 1000mm2
Finish Electro tinned / Nickel Plated
Copper High Voltage Through & Oil Stop Connectors/ Splices
Material Soft High Conductivity Copper for splices
Size 50mm2 to 500mm2
Finish Electro tinned / Nickel Plated
Copper In Line Connectors With Dimple Ferrules SPLICES
Material Soft High Conductivity Copper
Size 1.5mm2 to 2000mm2
Finish Electro tinned / Nickel Plated
Features Connectors are Provided with a dimple which acts as a
conductor & ensures conductors are inserted fully
Copper Terminals ( Single hole/ Without Hole)
Material Soft High Conductivity Copper
Size 1.5mm2 to 1000mm2
Finish Electro tinned / Nickel Plated
Features For connecting a conductor to an equipment terminal
Copper Weak Back Ferrules
Material Soft High Conductivity Copper
Size 16mm2 to 630mm2
Finish Electro tinned / Nickel Plated
Pre-Insulated Copper Terminals
Two- Hole / Blank Copper Terminals / Lugs Long Palm
Material Soft High Conductivity Copper
Size 50mm2 to 1200mm2
Finish Electro tinned / Nickel Plated
Features Used when cable run fall short or when the system is
continuously under vibrations
Copper Cable Lugs terminals Solder less Lugs
Material :High conductivity seamless copper tube to BS 2874 -C
101ASTM B 152-C11000 for All Copper terminals Cable lugs
solder less crimping terminals Aluminum terminals Aluminum
lugs.
Features: We are the first company in India to introduce bell
entry terminals to facilitate easy cable entry. Provided with
inspection window, thus ensuring full conductor insertion.
Sizes : From 1.5 mm , 2.5mm 4mm , 6mm,10mm, 16 mm2 ,25mm2 ,
35mm2 , 50mm2 ,70mm2, 95mm2 , 120 mm2 , 150 mm, 185 mm2 , 240
mm² , 300mm2 , 400mm, 500mm with different stud hole sizes as
required.
Finish :Uniform electro-Tin plating for operating temperatures
up to 150 °C. For operating temperatures above 150 °C &
up to
350 °C Electrolytic Nickel plating is suggested
Note:4 hole lugs for transformers and long palm lugs
available. Stamped and pressed lugs also available.
|
